ANYCUBIC Wash & Cure Max Machine, Ultra-large 2 in 1 washing and curing machine for LCD/DLP/SLA resin 3D printers Photon M3 Max/M5s Pro/m7 Pro, dual mode, alcohol-saving, washing size 300x165x300mm

["Larger washing and curing size: ANYCUBIC Wash and Cure Max can hold up to 14.9 L, surpassing the size of most washing and curing machines on the market. The maximum cleaning size is 300 x 165 x 300 mm (11.8 inches x 6.5 inches x 11.8 inches), 122% larger than Wash & Cure Plus, making it compatible with nearly all resin 3D printers for consumers with a size of 13.6 inches and below","Two cleaning modes: A. Spray cleaning. ANYCUBIC Wash & Cure Max uses mechanical nozzles to generate a strong water jet to quickly release IPA/alcohol onto the print. B. Soaking cleaning. After spray washing, the Wash & Cure machine initiates a bottom soaking to thoroughly remove resin trapped at the bottom or between the intricate details of the models","Alcohol consumption saving: 4L isopropyl alcohol is sufficient to clean large models (10 inches and above), resulting in over 50% savings compared to the 8.5 L required by conventional washing and curing machines","360° dimensional curing: With an automatically rotating curing platform, this washing and curing station provides higher curing energy values and longer radiation distances, allowing for comprehensive and efficient curing of your 3D printed models. The convenient all-in-one flip cover design enables easy opening and closing. The user-friendly control panel interface ensures a smooth and seamless operating experience","One-click washing and curing: Compared to conventional washing and curing machines, Wash and Cure Max can complete washing and curing with a dual function button. Say goodbye to time-consuming post-processing. Experience optimized model processing that saves you time and effort"]