EINSIDE chimney cap made of stainless steel AISI 304, rotating chimney ball cap, ventilation cap for stove chimney 120 mm.

"Rotating chimney smoke extractor with round base made of stainless steel AISI 304, single-walled external connection. Ball diameter: 20 cm, height: 27 cm, hose connection diameter: 12 cm. This stainless steel wind chimney consists of an upper part that rotates around an axis, suitable for all purposes of wind-driven smoke extraction. It is activated by the wind or by the heat of the air below. The rotating chimney with a round stainless steel base is also used wherever ventilation of rooms is required, such as in warehouses, technical rooms, etc. Regular annual maintenance with oil addition to the bearing cylinder is recommended. WARNING: Incorrect installation, such as with too low chimneys, can cause deformation or melting of the smoke extractor. Install at the end of the exhaust. Secure well with dowels, rivets, or hose clamps, do not use only silicone adhesive. The wind extractor solves the smoke problem in the house by increasing the draft; It is ideal as an exhaust for stoves and fireplaces, and for expelling kitchen fumes and smoke. It is also used for ventilation of bathrooms, toilets, and septic tanks. Provides air exchange in the room, even with the chimney turned off; Additionally, it allows for ventilation of apartments with occasional use. It can also be used for condensation-free attic ventilation, as well as in greenhouses, farms, and industrial warehouses. MAINTENANCE BECOMES EVEN MORE IMPORTANT WHEN THE ASPIRATOR IS INSTALLED: A: In ducts with high-temperature air outlet, which can cause the lubricant to dry out from the sleeve with the bearings. B: in wood fireplaces, whose smoke can leave significant soot or tar deposits that can block the bearings and rotation of the pull rod. DISASSEMBLY INSTRUCTIONS: 1) Loosen the nut on the rotating ball 2) Remove the rotating ball and remove the sesel on the rod 3) Remove the cuff 4) Fill the oil tank with brake oil or high-temperature resistant flow oils."